Product
Internal insulation composite board
With the growing emphasis on energy conservation and environmental protection, the insulation technology of building envelope structures has been increasingly enhanced. External wall insulation technology has emerged as a crucial building energy - saving technique. The internal insulation system for external walls is a traditional insulation approach. It has been applied and practiced in Europe and America for many years. At present, it is widely used in Japan and South Korea, which share the same latitude as China. The internal insulation composite board uses either graphite polystyrene boards made from BASF Neopor® graphite polystyrene particles or XPS extruded boards manufactured through environmentally - friendly CO₂ foaming technology as the substrate. These are then prefabricated and combined with paper - faced gypsum boards in the factory.
优势特点
-
01
Convenient and economical
Internal insulation for exterior walls represents a convenient and cost - effective solution, which has no impact on the existing external facade.
-
02Safe choices
The newly developed internal insulation system for exterior walls is a highly secure option for high- rise buildings.
-
03
Energy-saving and convenient
Most of the rapidly developing economic regions in China are located in relatively mild climates. External wall insulation on the inside can easily meet the energy-saving requirements of these areas and does not occupy too much interior space.
-
04
Environment friendly
In the case of commercial buildings with low usage frequency or residential buildings equipped with independent heating and cooling systems, the interior insulation system for exterior walls is more appropriate. This is because it can effectively reduce the heating and cooling energy consumption passing through the walls and rapidly regulate the indoor temperature.
参数表
|
Parameter table |
Indicators |
|---|---|
|
Thermal conductivity, W/(m·K) |
≤0.030 |
| Tensile bond strength, MPa |
The tensile bond strength is greater than 0.035 MPa, and the interface between the paper surface and the insulation board is damaged. The tensile bond strength of the inorganic panel composite is greater than 0.10 MPa, and the insulation board is damaged. |
| Impact resistance, times | ≥10 |
|
Size, mm |
Maximum size: 1200 * 300 |
相关产品推荐
